Натуральная! Leadshine ACS606 DC Вход безщеточный сервопривод с 18 до 60 VDC Вход Напряжение и 6A непрерывной 18A ток

Описание

Notice:

We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

ACS606 DC Input Brushlss Servo Drive

Leadshine's fully digital AC servo drive ACS606 is developed with 32-bit DSP based on advanced control algorithm. Since its input commands are PUL/DIR signals, the users can upgrade stepping drives to the ACS606 without changing control systems. The ACS606 can offer high precision, high speed and high reliability performance, and widely used in inkjet printers, engraving machines, and etc. A built-in controller can be used for testing and tuning. PC based and handheld configuration & tuning tools can meet different tuning environments or requirements. The ACS606 can drive both DC brushless and AC servo motors.But it is more suitable for the DC brushless servo motors. Compare to the ACS806, the ACS606 has less I/O, thus has smaller size and higher cost-effective.

Model:ACS606

Control Mode:Step & Dir

Max Input Frequency:200KHz

Input Voltage Range:18 - 60 VDC

Continuous Current:6 A

Peak Current:15 A

Logic Current Range:7-16 mA (10mA typical)

Logic Voltage Range:4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low

Communication Type:RS232

Pulse enabled at:Rising edge

Electronic gear ratio:1/255 - 255

# of Digital Inputs:2

Step Width:850 ns

Minimal Direction Setup Time:5,000 ns

Protection:Over-current; over-voltage; phase error; encoder or hall error; limit error; position following error

Isolation Resistance:500M Ohm

Environment:Avoid dust, oil fog and corrosive gases

Ambient Temporature:0-50°C

Humidity:40–95% RH

Operating Temporature:0-70°C

Vibration:5.9 m/s2 Max

Storage Temporature:-20-65°C

Specification:4.65 X 4.41 X 1.34 Inches

Weight:0.62 lb

Brushless Servo Drives Matching Table