Япония Mitsubishi FX3G серии PLC модуль FX3G-14MR/14MT/24MR/24MT/40MR/40MT/60MT/60MR-ES-A система управления промышленной автоматизацией

Описание

Заполнитель

Mitsubishi FX3G PLC has a built-in large-capacity program memory with a maximum of 32K steps. In standard mode, the basic instruction processing speed can reach 0.21μs. In addition, the number of devices that are greatly expanded allows you to edit programs and process data more freely. In addition, FX3G also performs superiorly in terms of floating-point operations and interrupt processing.Mitsubishi FX3G PLC body comes with two high-speed communication interfaces (RS422 & USB), which can be used synchronously and the communication configuration selection is more flexible. The transistor output type basic unit has built-in maximum three-axis 100KHz**** pulse output, which can be easily set by software editing instructions.In terms of program protection, FX3G has an essential breakthrough. Two levels of passwords can be set to distinguish between device manufacturers and end users. The password program protection function locks the PLC until a new program is loaded.The third-generation FX3G series PLC has improved the scalability of the product and has a unique dual bus expansion method. Use the left bus to expand the connection analog/communication adapter (up to four), the data transmission efficiency is higher, and the programming work is simplified; the right bus is fully compatible with the original system, and can be connected to the FX series. Traditional I/O expansion and special function modules. Two expansion boards can also be installed on the basic unit, which can be matched with the most intimate control system according to the needs of customers.Performance introduction Power specifications: AC100-240V 50/60HzPower consumption: 31W (14-point model), 32W (24-point model), 37W (40-point model), 40W (64-point model),Impact power supply: Maximum 30A 5ms or less / AC100V, maximum 50A 5ms or less / AC200VInput specifications: DC24V, 5~7mA (without voltage contact or sink input: NPN open collector transistor input, source input: PNP open collector transistor input)Output Specifications: Transistor output: 0.5A/1 point, 0.8A/4 points common terminal DC5~30VInput and output expansion: can be connected to the expansion device for FX2N seriesProgram memory: Built-in 32000 step EEPROM, optional: 32000 step EEPROM memory component Clock function: Built-in real-time clock (with time setting command, time comparison command, leap year compensation function), monthly error ± 45 seconds / 25 ° CClock data is stored for 10 days with built-in capacitors (can be stored for more than 10 days with optional battery)Built-in port: USB: 1ch (Mini-B, 12Mbps optocoupler insulation)RS-422: 1ch (Mini-DN 8Pin maximum 115.2kbps)Instructions: 29 basic instructions, 2 step ladder commands, 112 application commandsProcessing speed: 0.21μs (standard mode), 0.42μs (extended mode), application instructions: 0.5~ hundreds of μs/instructionHigh-speed processing: Input and output refresh command, input filter adjustment, input interrupt function, timer interrupt function, pulse capture functionMaximum number of input and output points: 256 points (the basic unit, the expansion device's I/O points 128 points and the CC-Link remote I/O points 128 points total)Auxiliary relay: 7680 points / timer: 320 pointsCounter 16-bit counter: 200 points, 32-bit counter: 35 points32-bit counter for high speed: [single phase] 60 kHz / 4 points, 10 kHz / 2 points, [2 phase] 30 kHz / 2 points, 5 kHz / 1 point .... maximum 6 pointsData register: generally use 8000 points, expand the register 24000 points, expand the file register 24000 points, index with 16 pointsAnalog potentiometer: Built-in 2 points, function expansion board for potentiometer operation (coming soon) can increase 8 pointsFunction expansion card: 14/24 point basic unit: single slot #40/60 point basic unit: 2 slotsSpecial adapter: 14/24-point basic unit: For analog and communication, one can be connected to each #40/60-point basic unit: two for analog and communication, but when combined with the function expansion board , there is a limit on the number of connectionsSpecial extensions: 4Support data link: RS-232C, RS-485, RS-422, peripheral device connection, simple PC connection, parallel connection, computer link, CC-Link, CC-Link/LT, no program communicationSupport programming software: GX Developer Ver.8.72A later (built-in USB driver)Model selection of peripheral devices: Select FX3G or FX1N (C), FX2N (C), FX2 (C). However, there are restrictions on the use of FX1N(C), FX2N(C), and FX2(C). FX3G series membersFX3G-14MR/ES-A base unit with built-in 8 in/6 out (relay), AC power supplyFX3G-24MR/ES-A base unit with built-in 14 in / out (relay), AC power supplyFX3G-40MR/ES-A base unit with built-in 24 in/16 out (relay), AC power supplyFC3G-60MR/ES-A basic unit with built-in 36-in/24-out (relay) AC power supplyFX3G-14MT/ES-A basic unit, built-in 8 in / 6 out (transistor leakage type), AC power supplyFX3G-24MT/ES-A basic unit, built-in 14 in / 10 out (transistor leakage type), AC power supplyFX3G-40MT/ES-A basic unit, built-in 24 in / 14 out (transistor leakage type), AC power supplyFX3G-60MT/ES-A basic unit, built-in 36 in / 24 out (transistor leakage type), AC power supplyFX3GA-24MR-CM basic unit with built-in 14 in / out (relay), AC power supplyFX3GA-40MR-CM basic unit, built-in 24 in / 16 out (relay), AC power supplyFC3GA-60MR-CM basic unit with built-in 36-in/24-out (relay) AC power supplyFX3GA-24MT-CM basic unit, built-in 14 in / 10 out (transistor leakage type), AC power supplyFX3GA-40MT-CM basic unit, built-in 24 in / 14 out (transistor leakage type), AC power supplyFX3GA-60MT-CM basic unit, built-in 36 in / 24 out (transistor leakage type), AC power supply