Описание

Hardware compatible with StepStick and Pololu A4988 Stepper Motor Drivers
stepper motor driver (chopper drive / constant current drive)
Components on the bottom PCB side for better heat emission
Automatic standby current reduction
Micro-Player - microstep interpolator for increased smoothness of microstepping
stealth Chop - for quiet operation and smooth motion
spread Cycle - highly dynamic motor control chopper
Drive capability up to 3A (RMS) continuous coil current
SPI interface for configuration
Motor supply voltage:10-35V
Logic supply voltage:3.3-5V
RSense:0.075 Ohm
What is the difference between TMC5160 and TMC2130 SilentStepSticks?
TMC5160 SilentStepSticks have no standalone mode and no internal pull-up resistor on the CS/SS pin.(SPI configuration is always needed)
The direction is not inverted on TMC5160 SilentStepSticks.
The software configuration is mostly the same,except the motor current calculation is different.
TMC5160 SilentStepSticks have an improved stealthChop mode(stealthChop2)and a higher motor current rating.
On TMC5160 SilentStepStick v1.3 the CLK pin has to be connected to GND.
SPI configuration interface(up to 4MHz)
up to 256 native microsteps(without interpolation)
cool Step - current control for energy savings
stallGuard2 - sensorless motor load detection
dcStep - load dependent speed control
Automatic stealthChop and spreadCycle switchover depending on velocity
Model Number:tmc5160 v1.2
Note:
This version is not required to be wired.It is used on the F6 board.We will provide the wiring version for other boards.
colour:white
Material:Metal + plastic
Package Contents:
1 * Drive module
1 * heatsink
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
stepper motor driver (chopper drive / constant current drive)
Components on the bottom PCB side for better heat emission
Automatic standby current reduction
Micro-Player - microstep interpolator for increased smoothness of microstepping
stealth Chop - for quiet operation and smooth motion
spread Cycle - highly dynamic motor control chopper
Drive capability up to 3A (RMS) continuous coil current
SPI interface for configuration
Motor supply voltage:10-35V
Logic supply voltage:3.3-5V
RSense:0.075 Ohm
What is the difference between TMC5160 and TMC2130 SilentStepSticks?
TMC5160 SilentStepSticks have no standalone mode and no internal pull-up resistor on the CS/SS pin.(SPI configuration is always needed)
The direction is not inverted on TMC5160 SilentStepSticks.
The software configuration is mostly the same,except the motor current calculation is different.
TMC5160 SilentStepSticks have an improved stealthChop mode(stealthChop2)and a higher motor current rating.
On TMC5160 SilentStepStick v1.3 the CLK pin has to be connected to GND.
SPI configuration interface(up to 4MHz)
up to 256 native microsteps(without interpolation)
cool Step - current control for energy savings
stallGuard2 - sensorless motor load detection
dcStep - load dependent speed control
Automatic stealthChop and spreadCycle switchover depending on velocity
Model Number:tmc5160 v1.2
Note:
This version is not required to be wired.It is used on the F6 board.We will provide the wiring version for other boards.
colour:white
Material:Metal + plastic
Package Contents:
1 * Drive module
1 * heatsink
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

|

ВсеМы можем отправить товар в течение 5-8 дней недели, обычно мыВ соответствии с временем заказа клиента для упаковки и доставки, нам нужноВнимательно проверьте качество товара перед отправкой, так что возьмитеВремени, чтобы справиться с этим. Время доставки: Из-заДля форс-мажорных факторов: ураганов, дождевых штормов влияет на полеты. ВедущийДля того чтобы логистика задержки. Мы честные продавцы, не дадим вам страдатьПотери. Пожалуйста, дайте логистической компании немного времени обработки, мыПодождите, пока посылка достигнет вашей стороны. Если ваша Логистическая информация прибывает в местное почтовое отделение: В том случае, еслиМестное почтовое отделение не связывается с вами, пожалуйста, свяжитесь с вамиМестное почтовое отделение как можно скорее, чтобы получить ваш пакет. В противном случаеСверхурочное получение посылок, местный почтовый отдел вернет вашПосылка, воздействие самоответственности. Время защиты истекает: В тех случаях, когдаМы закончили время доставки, если период защиты продуктаВыйдите, пожалуйста, продлите период защиты продукта самостоятельно илиСвяжитесь с нами, пожалуйста, не открывайте спор напрямую. Ввозные таможенные пошлины: НалогиИ сборы не включены в стоимость товара или стоимость доставки.Эти расходы являются ответственностью покупателя. Импортные пошлины, налоги иРасходы не включены в стоимость товара или стоимость доставки. ЭтиРасходы являются ответственностью покупателя




Если товар поврежден, мы должны связаться в течение 24 часов с момента получения.
Если данный товар находится в вашем распоряжении более 7 дней, он считается пользованным товаром, и мы не производим возврат или замену. В том случае, еслиВы не удовлетворены получением товара (неправильный, поврежденный,Дефект или товар не соответствует описанию), пожалуйста, верните его в течение 7 дней дляЗамена или возврат денег.Для любогоПерсональные причины (выберите не нравится или мне не нужно этот продуктБольше), возврат отправка, зарядное устройство будет товаров возлагается на покупателя. МыНе будет принимать какие-либо вещи с запахами (духи. дым, и т. д.)
ВсеВозвращенные товары должны быть в оригинальной упаковке, и вы должны предоставитьМы с номером отслеживания доставки, конкретной причиной возврата,И идентификатор вашего заказа.Характеристики
- Питание
- Переменный ток
- Номер модели
- Motor Driver Module
- Тип двигателя
- Шаговый электродвигатель






















